This is a new mobile robot called Sloth developed by the SunFounder company. It is made by the SunFounder Nano board as control board and compatible with Arduino Nano board. Each leg has 2 joints driven by servo and is very flexible. It can not only do many actions but dancing. Qualified with HC-SR04 ultrasonic ranging module, it can detect and avoid obstacles intelligently. Visualize programming can be utilized, people who know nothing about it can also program. You can DIY many different models and program to make a different bio-robot by controlling it do different actions. If you have several robots, you can control them to play together, for example: racing, kick a ball and battle.
4 x Tower Pro Servo 9g
1 x Ultrasonic Module
4 x M3*30 Bi-pass Aluminum Standoff
4 x M3*6+6 Single-pass Aluminum Standoff
12 x M3*8 Round Head Phillips Screw
12 x M3*6 Round Head Phillips Screw
16 x M3 Nut
12 x M2*8 Round Head Phillips Screw
12 x M2 Nut
8 x M1.2*4 Self-tapping Screw
4 x M1.4*8 Round Head Phillips Screw
4 x M1.4 Nut
1 x SunFounder Nano Board
1 x SunFounder Servo Control Board
1 x 2x18650 Battery Holder
1 x Heat Shrink Tubing (30cm)
1 x Riband (40CM)
2 x M3*6 Hollow Rivet
2 x Ø3*8*4 Band Edge Bearing
1 x Mini USB Cable
1 x 4-Pin Anti-reverse Cable
1 x Phillips Screw Driver
A cute and cool biped robot - Sloth, brings you the fun of assembly and leads you to the Arduino programming road.
With an ultrasonic module for obstacle avoidance.
Each leg has 2 joints driven by servo to simulate human walking.
Simple to control, with SunFounder Nano Board controlling the 4 servos to drive the Sloth to walk.
Easy to assemble and connect wires; for video tutorial: https://www.sunfounder.com/video/category/?cat=51